ZGSM series-KS outdoor LED street lights with the power from 25W to 55W;
Advantages
a. Fully aluminum alloy Die-casting case, stainless steel screws.
b. High transparency tempered glass
c. Smooth body with self-cleanness
d. High lamp luminous efficiency: up to 115 LM/W.
e. Toolless, the housing can be opened without tools.
f. Power turn off protector, protect the safety of personnel.
g. 10KV/20KV Surge Protection Device.
h. Imported breather, increase lamp service life.
i. Vertical and horizontal installation both available.
j. Variety of spectral types are optional for different road situation.
k. Meanwell HLG driver or Inventronics driver
l. Enough space to extend the smart remote controller to support smart city
Application
Roadway, street, path way, park, public square, parking lot, carpark, high way, Urban main roads
Description
The smart KS series street light use fully aluminum alloy Die-casting case with better heat transfer. And the screws on KS series street fixture are all stainless steel.
Fixture covered by high transparency tempered glass in KS series street light to make sure high system efficiency and effective protect the LEDs without any broken.
Via the smooth body design on the back of KS series street light that make the light no accumulation of dust and bird droppings after rain wash.
The High efficiency Philips Luxeon 3030 2D LED chips is used in KS series, so the system efficiency of KS series street light can up to 115lm/w.
In order to make sure convenient for maintain , we use the snap lock design in k series street light, the street fixture can be opened without any tools.
Safety of electrician when install the street light always be serious consider when our product designer develop a new street light, so in KS series, we add a power turn off protector mount on the end of driver input, When people open the KS series street fixture, the power will be cut immediately.
In order to protect the KS series street fixture without any broken from surge, we add a surge protection device(SPD) on the end of driver input, it can resistant 10/20KV surges which possible come from power grid or from the thunder.
There have a imported breather both on driver box and led board box, with this breather, the inside and outside of street light can keep same air pressure, so there will be prevented the water leave inside the fixture.
In some street light project, the poles is straight, so only vertical installation is suitable for these existing poles, K series street light support both vertical and horizontal installation is well welcome. In addition, the installation adjustable tilt angle can be 0-5-10-15°
Different road situation need different light distribution to make sure good lighting effect, Because of this reason, KS series street light have three lens type can supply three light distribution to suit to different road width, pole distance, pole height and so on.
At present, most street light is considering to join to smart lighting system, such as PLC, Zigbee, Wifi and other street lamp intelligent control system. Therefore, the KS series use Inventronics or Meanwell 0-10v dimming driver if request to support the system.
Datasheet
Product |
ZGSM-LD25KS |
ZGSM-LD35KS |
ZGSM-LD55KS |
Nominal Wattage |
25W |
35W |
55W |
LED Qty &Current |
48 units &83 mA |
72 units &78 mA |
96 units &88 mA |
Input Voltage |
100-240V /277V AC 50 /60Hz |
||
Dimming |
0-10V |
||
LED Brand |
Philips Lumileds 3030 2D |
||
Driver Brand |
Non-dimmable: MeanWell HLG Driver | Dimmable: Inventronics Driver |
||
Max. Current @120V |
0.26A |
0.36A |
0.57A |
Max. Current @208V |
0.15A |
0.21A |
0.33A |
Max. Current @240V |
0.13A |
0.18A |
0.28A |
Max. Current @277V |
0.11A |
0.16A |
0.25A |
Operating Temperature |
-40 ºC to +50 ºC |
||
Power Factor(PF) |
>0.95 |
||
THD |
<20% |
||
Lumen Output (+/- 5%) |
2875 lm |
4025 lm |
6325 lm |
Luminaire efficacy (+/- 5%) |
115 lm /w |
115 lm /w |
115 lm /w |
Optic |
1M, 2M, 3M |
||
CRI |
>70 |
||
CCT |
4000K (Nature White), 5000K (Pure White), 5700K (Cool White) |
||
Rating |
IP66, IK08 |
||
Material |
Die-cast aluminum; Tempered Glass |
||
Installation |
Horizontal and vertical both available; Adjustable tilt angle: 0-5-10-15º |
||
Accessories (Optional) |
Motion Sensor, Photocell(NEMA) |
||
Shell Color |
Light Grey or Deep Grey |
||
Lumen Maintenance |
> 75,000 hours-L₇₀ at 25 ºC |
||
Certifications |
CE, ROHS,CB,ENEC,LM80, ISO9001, ISO14001 |
||
Fixture Weight |
5.8 kg /12.8 lbs |
5.9 kg /13.0 lbs |
6.0 kg /13.2 lbs |
Packaging Weight |
7.3kg /16.1 lbs |
7.4 kg /16.3 lbs |
7.5 kg /16.5 lbs |
Packaging Dimension |
675 X290 X220 mm /36.6 X11.4 X8.7 inches |
||
Packaging Type |
1 unit /ctn. |
Case Studies
279 Sets 65W Solar street light in Ecuador, configuration list as below
1pcs x 65W H series street light-DC24V
2pcs x 120W monocrystalline solar panel
2pcs x 120Ah solar battery
1pcs x 6m pole with accessories
1pcs x 20A/DC24V solar controller