● General Description:
This 1310 nm DFB 10 Gigabit SFP+ transceiver is designed to transmit and receive optical data over single mode optical fiber for link length 40km.
● Quick Details:
► Optical interface compliant to IEEE 802.3ae 10GBASE-LR;
► Electrical interface compliant to SFF-8431;
► Hot Pluggable;
► 1310nm DFB transmitter, PIN photo-detector;
► Operating case temperature: 0℃ to 70℃;
► Low power consumption;
► Applicable for 10km SMF connection;
► All-metal housing for superior EMI performance;
► Advanced firmware allow customer system encryption information to be stored in transceiver;
► Cost effective SFP+ solution, enables higher port densities and greater bandwidth 550-Meter.
● Application:
► 10GBASE-LR at 10.3125Gbps;
► 10GBASE-LW at 9.953Gbps;
► Other optical links.
● Figure 1: Interface to Host:
● Description:
Form Factor | SFP |
Compatibility |
Cisco Compatible |
Distance |
40km |
Max Data Rate |
1000Mbps |
Wavelength |
1310nm |
Max Cable Distance |
550m over OM2 MMF |
Interface |
LC Duplex |
Verification Optical Components |
VCSEL 850nm |
DOM Support |
Yes |
Cable Type |
SMF |
TX Power |
-9.5 ~ - 3dBm |
Receiver Sensitivity |
< -17dBm |
HS Code |
Optical fibre cables-85447000.00 |
● Optical characteristics transceiver:
Parameters | Symbols |
Min |
Typ |
Max |
Unit |
40km | |||||
Centre Wavelength BXD |
λC |
1320 |
1330 |
1340 |
nm |
Centre Wavelength BXU |
λC |
1260 |
1270 |
1280 |
nm |
Spectral Width (RMS) |
σ |
|
|
1 |
nm |
Average Output Power |
P0ut |
-3 |
|
+2 |
dBm |
Extinction Ratio |
EX |
3.5 |
6 |
|
dB |
● Mechanical:
● Optical characteristics receiver:
Parameters | Symbols |
Min |
Typ |
Max |
Unit |
20km | |||||
Centre Wavelength BXD |
λC |
1260 |
1270 |
1280 |
nm |
Centre Wavelength BXU |
λC |
1320 |
1330 |
1340 |
nm |
Reveiver Sensitivity |
Sen |
-14.5 |
|
|
dBm |
Maximum input |
Pmax |
0 |
|
|
dBm |
LOS De-Assert |
LOSd |
|
|
-14 |
dBm |
LOS Assert |
LOSa |
-25 |
|
|
dBm |
LOS Hysteresis |
LOSh |
0.5 |
|
4 |
dBm |
40km | |||||
Centre Wavelength BXD |
λC |
1260 |
1270 |
1280 |
nm |
Centre Wavelength BXU |
λC |
1320 |
1330 |
1340 |
nm |
Reveiver Sensitivity |
Sen |
-16 |
|
|
dBm |
Maximum input |
Pmax |
0 |
|
|
dBm |
LOS De-Assert |
LOSd |
|
|
-17 |
dBm |
LOS Assert |
LOSa |
-27 |
|
|
dBm |
LOS Hysteresis |
LOSh |
0.5 |
|
4 |
dBm |
60km | |||||
Centre Wavelength BXD |
λC |
1260 |
1270 |
1280 |
nm |
Centre Wavelength BXU |
λC |
1320 |
1330 |
1340 |
nm |
Reveiver Sensitivity |
Sen |
-22 |
|
|
dBm |
Maximum input |
Pmax |
-7 |
|
|
dBm |
LOS De-Assert |
LOSd |
|
|
-23 |
dBm |
LOS Assert |
LOSa |
-33 |
|
|
dBm |
LOS Hysteresis |
LOSh |
0.5 |
|
4 |
dBm |
80km | |||||
Centre Wavelength BXD |
λC |
1480 |
1490 |
1500 |
nm |
Centre Wavelength BXU |
λC |
1530 |
1570 |
1580 |
nm |
Reveiver Sensitivity |
Sen |
-22 |
|
-7 |
dBm |
Maximum input |
Pmax |
-7 |
|
|
dBm |
LOS De-Assert |
LOSd |
|
|
-24 |
dBm |
LOS Assert |
LOSa |
-34 |
|
|
dBm |
LOS Hysteresis |
LOSh |
0.5 |
|
|
dBm |
Dispersion penalty |
|
|
|
3.0 |
dBm |
● Electrical characteristics:
Parameters | Symbols |
Min |
Typ |
Max |
Unit |
Remarks |
Supply Voltage |
Vcc |
3.14 |
3.3 |
3.46 |
V |
|
Supply Current 20km |
Icc |
|
270 |
350 |
mA |
|
Supply Current 40km |
|
|
300 |
450 |
mA |
|
Supply Current 60km |
|
|
300 |
450 |
mA |
|
Supply Current 80km |
|
|
|
500 |
mA |
|
| ||||||
Supply Voltage |
Vcc |
3.14 |
3.3 |
3.46 |
V |
|
Supply Current |
Icc |
|
|
300 |
mA |
|
Reference Differential Input |
Zd |
|
100 |
|
mA |
|
Input AC Common Mode Input |
|
0 |
25 |
|
mA |
|
Differential Input Voltage Swing |
VID |
150 |
|
900 |
mA |
|
Total Jitter |
|
|
|
|
|
|
Data Dependant Jitter |
|
|
|
|
|
|
Uncorrelated Jitter |
|
|
|
|
|
|
Eye Mask |
See SFP+ MSA |
X1 |
|
|
|
UI |
Eye Mask |
See SFP+ MSA |
X2 |
|
|
0.35 |
UI |
● ESD:
Packaging & Labeling
This easy to handle and well-protected transceiver package has been labeled and marked to default FOCC standards. Customized label or package solutions are available on request.
● OEM & Customs:
Partnering with a variety of world class OEM manufacturers for over 8 years, FOCC is able to provide customized high-quality and cost-effective solutions for all needs and specifications, including optical design, mechanical design, Printed Circuit Board (PCB) layout and electrical design, software & firmware design, integrated assembly, specific labels, etc. With surging sales and favorable customer feedback, FOCC has been expanding rapidly across the world and is becoming the leading provider of the optical communication industry.
● Shipment:
FOCC can ship via FedEx, DHL, UPS, TNT, EMS or a customer-arranged carrier. Items are often shipped the same day (some transceivers can be out the door in 20 minutes). If we have no stock in any of our global warehouses, the shipment will be delayed for 1-2 days. DHL will take 2-4 business days for delivery and FedEx only needs 1-3 business days. For Spain, Italy, Brazil and certain other countries, items will take longer to arrive due to the customs clearance period.